Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Tang, J.*; Wang, Y.*; Fujihara, Hiro*; Shimizu, Kazuyuki*; Hirayama, Kyosuke*; Ebihara, Kenichi; Takeuchi, Akihisa*; Uesugi, Masayuki*; Toda, Hiroyuki*
Scripta Materialia, 239, p.115804_1 - 115804_5, 2024/01
Times Cited Count：0 Percentile：0(Nanoscience & Nanotechnology)Stress corrosion cracking (SCC) behaviors induced by the combination of external and internal hydrogen (H) in an Al-Zn-Mg-Cu alloy were systematically investigated via in situ 3D characterization techniques. SCC of the Al-Zn-Mg-Cu alloy could initiate and propagate in the potential crack region where the H concentration exceeded a critical value, in which the nanoscopic H-induced decohesion of 
-MgZn
precipitates resulted in macroscopic cracking. External H that penetrated the alloy from the environment played a crucial role during the SCC of the Al-Zn-Mg-Cu alloy by generating gradient-distributed H-affected zones near the crack tips, which made Al alloys in water environment more sensitive to SCC. Additionally, the pre-existing internal H was driven toward the crack tips during plastic deformation. It was involved in the SCC and made contributions to both the cracks initiation and propagation.
Zhou, L.*; Zhang, H.*; Qin, T. Y.*; Hu, F. F.*; Xu, P. G.; Ao, N.*; Su, Y. H.; He, L. H.*; Li, X. H.*; Zhang, J. R.*; et al.
Metallurgical and Materials Transactions A, 11 Pages, 2024/00
Times Cited Count：0Hirano, Tatsumi*; Maeda, Takehiro*; Murata, Tetsuyuki*; Yamamoto, Takahiro*; Matsubara, Eiichiro*; Shobu, Takahisa; Shiro, Ayumi*; Yasuda, Ryo*; Takamatsu, Daiko*
SPring-8/SACLA Riyo Kenkyu Seikashu (Internet), 11(5), p.345 - 353, 2023/10
no abstracts in English
Kozawa, Tatsuya*; Fujihara, Masayoshi; Uchihara, Takeru*; Mitsuda, Setsuo*; Yano, Shinichiro*; Tamatsukuri, Hiromu; Munakata, Koji*; Nakao, Akiko*
Scientific Reports (Internet), 13, p.13750_1 - 13750_8, 2023/08
Times Cited Count：0 Percentile：0(Multidisciplinary Sciences)In condensed matter physics, pressure is frequently used to modify the stability of both electronic states and atomic arrangements. Under isotropic pressure, the intermetallic compound MnP has recently attracted attention for the interplay between pressure-induced superconductivity and complicated magnetic order in the vicinity. By contrast, we use uniaxial stress, a directional type of pressure, to investigate the effect on the magnetism and crystal structure of this compound. An irreversible magnetisation response induced by uniaxial stress is discovered in MnP at uniaxial stress as low as 0.04 GPa. Neutron diffraction experiments reveal that uniaxial stress forms crystal domains that satisfy pseudo-rotational symmetry unique to the MnP-type structure. The structure of the coexisting domains accounts for the stress-induced magnetism. We term this first discovered phenomenon atomic reconstruction (AR) induced by uniaxial stress. Furthermore, our calculation results provide guidelines on the search for AR candidates. AR allows crystal domain engineering to control anisotropic properties of materials, including dielectricity, elasticity, electrical conduction, magnetism and superconductivity. A wide-ranging exploration of potential AR candidates would ensure that crystal domain engineering yields unconventional methods to design functional multi-domain materials for a wide variety of purposes.
Shimodaira, Masaki; Ha, Yoosung; Takamizawa, Hisashi; Katsuyama, Jinya; Onizawa, Kunio
Proceedings of ASME 2023 Pressure Vessels and Piping Conference (PVP 2023) (Internet), 11 Pages, 2023/07
In the current structural integrity assessment of the reactor pressure vessel, the accurate reference temperature (T
) based on the Master Curve method is necessary. The T can be estimated by using the Mini-C(T) fracture toughness specimen in accordance with ASTM E1921 and JEAC4216, which prescribe the pre-crack straightness criteria. A requirement in ASTM E1921 has been revised in a decade to increase the accuracy and reasonability, and the applicable crack curvature has been varied by applied codes. The pre-crack curvature of the Mini-C(T) specimen might have an impact on the T because of the variation of the plastic constraint. In this work, the effect of the crack curvature on the fracture toughness (K
) evaluation using the Mini-C(T) specimen was quantitatively evaluated by using the finite element analysis (FEA) including the Weibull stress analysis, to discuss the difference in a requirement of the crack straightness in ASTM E1921 and JEAC4216. FEAs showed a possibility that the upper limit curvature would decrease the plastic constraint, and consequently obtain higher K in the Mini-C(T) specimen. Furthermore, if the upper limit curvature according to the ASTM E1921-21 was allowed, the T would be estimated as non-conservative based on the Weibull stress analysis. In contrast, the difference in (T) between the crack with upper limit curvature according to JEAC4216 and the ideal straight crack was not significant.
Yamaguchi, Yoshihito; Takamizawa, Hisashi; Katsuyama, Jinya; Li, Y.
Proceedings of ASME 2023 Pressure Vessels and Piping Conference (PVP 2023) (Internet), 9 Pages, 2023/07
The stress intensity factor (SIF) for crack at nozzle corner is a key parameter in structural integrity assessment of nozzle in reactor pressure vessel (RPV). Although various SIF solutions for surface cracks at nozzle corners have been proposed, most of them are only focusing on the deepest point of the crack, and the information about geometric dimension of the nozzle corner is not clear. According to the previous fatigue test results regarding the surface crack at the nozzle corner, the amounts of crack growth at the surface points were larger than that at the deepest point of the crack. Such results imply that SIFs at the surface points may be higher than that at the deepest point. To increase the reliability of the structural integrity assessment, it is necessary to provide SIF solutions for both surface and deepest points. In this study, SIF solutions for two surface points and the deepest point of surface crack at nozzle corners are developed through finite element analyses and the solutions are provided corresponding to the geometric dimensions of nozzle corner and crack size.
Zhang, H.*; Wu, S. C.*; Ao, N.*; Zhang, J. W.*; Li, H.*; Zhou, L.*; Xu, P. G.; Su, Y. H.
International Journal of Fatigue, 166, p.107296_1 - 107296_11, 2023/01
Times Cited Count：4 Percentile：61.91(Engineering, Mechanical)Suzuki, Kenji*; Kura, Komoe*; Miura, Yasufumi*; Shiro, Ayumi*; Toyokawa, Hidenori*; Saji, Choji*; Kajiwara, Kentaro*; Shobu, Takahisa
Zairyo, 71(12), p.1005 - 1012, 2022/12
This paper describes a stress measurement from a welded part of an austenitic stainless steel using synchrotron X-rays. Difficulty measuring the X-ray stress of the welded part is caused by the broadening of the diffraction spot in the radial and circumferential directions. The bending strains of the rectangular bar made of the welded part were measured using synchrotron white X-rays and the double exposure method. To improve the energy resolution, monochromatic synchrotron X-ray of 70 keV was used. The diffraction pattern showed the sharp arc like a pattern from texture material. The diffraction profile was obtained from the integral of the diffraction intensity in the direction of the circumference. The diffraction angle was determined using the double exposure method. As a result, the distribution of the residual stresses of the welded part could be measured.
Yoshida, Masayuki*; Nishihata, Itsuki*; Matsuda, Tomoki*; Ito, Yusuke*; Sugita, Naohiko*; Shiro, Ayumi*; Shobu, Takahisa; Arakawa, Kazuto*; Hirose, Akio*; Sano, Tomokazu*
Journal of Applied Physics, 132(7), p.075101_1 - 075101_9, 2022/08
Times Cited Count：5 Percentile：67.2(Physics, Applied)Yamaguchi, Yoshihito; Mano, Akihiro; Li, Y.
Proceedings of ASME 2022 Pressure Vessels and Piping Conference (PVP 2022) (Internet), 10 Pages, 2022/07
The steam generator (SG) tube is one of the important components in pressurized water reactors. Flaws such as wall-thinning or stress corrosion cracking have been reported in SG tubes. The burst pressure where both the internal and external pressures from the primary and secondary coolant systems are considered must be predicted to assess the structural integrity of SG tubes. Burst tests were performed by various organizations. On the basis of the test results, failure estimation methods were proposed. In this study, previous burst test data and existing failure estimation methods for SG tubes with wall-thinning or crack were investigated. As a result, the coefficient of the existing estimation method for SG tube with uniform wall-thinning was updated. In addition, failure estimation methods that are suitable for SG tubes with crack or local wall-thinning were proposed by considering the effects of the flaw shape and size on the burst pressure. The applicability of the failure estimation methods was confirmed by comparing the predicted results with the burst test data in actual SG tubes.
Soma, Yasutaka; Komatsu, Atsushi; Ueno, Fumiyoshi
Corrosion, 78(6), p.503 - 515, 2022/06
Times Cited Count：0 Percentile：0(Materials Science, Multidisciplinary)The effects of electrochemical potential (ECP) on water chemistry within a crevice are of critical importance for understanding stress corrosion cracking (SCC) of Fe-Cr-Ni alloys in high temperature water. In this study, the effects of ECP on the electrical conductivity of a solution within a Type-316L stainless steel crevice (
) have been studied in 288
C and 8 MPa water containing 10 ppb Cl
as major anionic species. In situ measurements of in a rectangular crevice with a gap of 15 
m and a depth of 23 mm have been conducted using small sensors installed at different crevice depths. An increase in ECP from -0.49 V (vs. standard hydrogen electrode) to -0.12 V resulted in an increase in from 12 Scm
to 160 Scm at a distance of 21 mm from the crevice mouth. The increase in reached a maximum at about 0.15 V (about 300 Scm) and then tended to decrease with increasing potential. Finite element model analysis taking into account the electrochemical reaction quantitatively reproduced this behavior. It is considered that Cl is the major anionic species transported into the crevice at relatively low potentials, and that increases monotonically with increasing ECP. On the other hand, when ECP exceeds around 0 V, a sufficient amount of HCrO
generated by transpassive dissolution also transported into the gap. Since this chemical species is highly oxidizing, unlike Cl, it is assumed that it reacts with metal cations to oxidize and precipitate them, thereby lowering conductivity.
Iwamoto, Chihiro*; Takamura, Masato*; Ueno, Kota*; Kataoka, Minami*; Kurihara, Ryo*; Xu, P. G.; Otake, Yoshie*
ISIJ International, 62(5), p.1013 - 1022, 2022/05
Times Cited Count：2 Percentile：32.54(Metallurgy & Metallurgical Engineering)Suzuki, Kenji*; Yamada, Minami*; Shiro, Ayumi*; Shobu, Takahisa; Toyokawa, Hidenori*; Saji, Choji*
Zairyo, 71(4), p.347 - 353, 2022/04
We have already succeeded in the residual stress of aluminum alloys using the double exposure method (DEM) with 30 keV synchrotron radiation X-rays. However, the DEM has not be applied in the range of high-energy synchrotron X-rays. In this study, the stress measurements of a shrink-fitted ring using the DEM with synchrotron monochromatic X-rays beyond about 70 keV were performed. A CdTe pixel detector and a CCD camera were used as a detector. The shrink-fitted specimen of SUS304 was quasi-coarse grains of 43 micro-meters, and the diffraction rings were spotty. Despite quasi-coarse grains, it was possible to measure the stresses of the shrink-fitted specimen using the DEM. As a result, the DEM is excellent method to measures the stress for coarse grained materials. In addition, it is better to make the length between the detection positions longer to improve precision of the DEM. On the other hand, it was ineffective to increase the positions of detection.
Nishimura, Hayato*; Hojo, Tomohiko*; Ajita, Saya*; Shibayama, Yuki*; Koyama, Motomichi*; Saito, Hiroyuki*; Shiro, Ayumi*; Yasuda, Ryo*; Shobu, Takahisa; Akiyama, Eiji*
Tetsu To Hagane, 107(9), p.760 - 768, 2021/09
Times Cited Count：0 Percentile：0(Metallurgy & Metallurgical Engineering)no abstracts in English
Kobayashi, Kensuke*; Suzuki, Hiroshi; Nishio, Yuhei*; Kanematsu, Manabu*
Nihon Kenchiku Gakkai Kozokei Rombunshu, 86(785), p.1026 - 1035, 2021/07
no abstracts in English
Shibayama, Yuki; Hojo, Tomohiko*; Koyama, Motomichi*; Saito, Hiroyuki*; Shiro, Ayumi*; Yasuda, Ryo*; Shobu, Takahisa; Matsuno, Takashi*; Akiyama, Eiji*
ISIJ International, 61(4), p.1322 - 1329, 2021/04
Times Cited Count：3 Percentile：25.78(Metallurgy & Metallurgical Engineering)Nishimura, Hayato*; Hojo, Tomohiko*; Ajita, Saya*; Shibayama, Yuki*; Koyama, Motomichi*; Saito, Hiroyuki*; Shiro, Ayumi*; Yasuda, Ryo*; Shobu, Takahisa; Akiyama, Eiji*
ISIJ International, 61(4), p.1170 - 1178, 2021/04
Times Cited Count：3 Percentile：25.78(Metallurgy & Metallurgical Engineering)Ito, Michitane*; Mukai, Tomohisa*; Suzuki, Hiroshi; Nanbu, Yoshihito*; Suzuki, Junichi*; Matsuzawa, Koichi*; Kinugasa, Hideyuki*
Nihon Kenchiku Gakkai Gijutsu Hokokushu, 27(65), p.99 - 103, 2021/02
no abstracts in English
Tsukada, Takashi; Soma, Yasutaka
Hozengaku, 19(4), p.37 - 44, 2021/01
Corrosion Cracking phenomena in JPDR (Japan Power Demonstration Reactor) the first Japanese Light Water Reactor is reviewed. This review describes two major cracking failure. The first was found during inspection in 1966 as the cracking failure on weld-overlay cladding at the inner wall of the top head. A series of analysis showed that some of the cracks reached the base metal across the weld boundaries and further penetrated into the vessel wall. Significant depletion of ferrite content was detected in manually welded part considered to assisted the cracking. These inspection result in improvement of the welding procedure and no similar failures have been reported in Japanese reactor. This mode of failure gave rise to a new research field studying the corrosion fatigue behavior of low alloy steel because of importance to assess pressure boundary of the reactor. The experiment of JPDR also contributed to the establishment of international cooperation for studying EAC (environmentally assisted cracking). The second failure was found in 1972 near the welded part between stainless piping and safe end. The extensive research concluded that this failure was caused by Stress Corrosion Cracking.
Ogawa, Yusuke*; Suzuki, Satoru*; Taniguchi, Naoki; Kawasaki, Manabu*; Suzuki, Hiroyuki*; Takahashi, Rieko*
Materials and Corrosion, 72(1-2), p.52 - 66, 2021/01
Times Cited Count：2 Percentile：12.73(Materials Science, Multidisciplinary)Cast steel is one of the promising alternative to forged steel that is the current reference material for carbon steel overpack. In this study, the full-scale cast steel overpack was produced experimentally and the distribution of casting defects were investigated. The corrosion test regarding corrosion rate and stress corrosion cracking (SCC) susceptibility were also conducted using samples taken from the full-scale cast steel overpack and the corrosion resistance of cast steel was compared with that of forged steel. From above two corrosion tests, it can be said that the corrosion resistance of cast steel is mostly the same as that of forged steel.
